Base Key Functions; Outgoing Messages; Recording Outgoing Messages (Ogm 1 Or Ogm 2); Playback The Outgoing Message - Topcom Butler 2455 Manual De Operación

HANDL. B2455_euro.qxd
Butler 2455
MEMORY FULL-LED is turned on when the internal memory is full and no new messages can be
recorded.

8.2 Base Key Functions

Note: - The
Key
1,2
1
2
3
4
5
6
7
8
9

8.3 Outgoing Messages

Two outgoing messages of 2 minutes can be recorded (OGM1 and OGM2).
• Outgoing message 1 for the answering function and possibility for callers to leave a
message.
• Outgoing message 2 for the answering function without allowing callers to leave a
messages on the machine.

8.3.1 Recording outgoing messages (OGM 1 or OGM 2)

• Press the
• A voice will playback the recorded OGM
• Press the
1,2
• Record the outgoing message after the beep
• Press the Stop
Note: The recording cannot exceed 2 minutes. If no outgoing message is recorded, the prerecorded
outgoing message is used.

8.3.2 Playback the Outgoing Message

To check the outgoing message now set:
• Press the
1,2
Note: To stop playing the welcome note briefly press the Stop
27/2/03
keys are at the bottom of the base
&
Stand-by mode
Press key briefly press key for 2 seconds
Play OGM
Playback messages
None
Set volume
speech +ringing
Select OGM
Play VIP-code
Current number of
ring tones
Playback Time
None
-key to select the OGM.
-key for two seconds
-
key to stop recording.
key.
9:01 pm Page 29
Record OGM
None
Record memo
None
Switch On-Off
Set VIP-code
Set numbers of
ring tones
Set date/time
Delete all messages
-
key .
29 29 29
During message
play-back
Go to previous message
Pause
Skip message
Set volume
Stop
None
None
None
Delete message or
delete OGM