Product Description - Grundfos Oxiperm Pro OCD-162 Instrucciones De Instalación Y Programación

4. Product description

Oxiperm Pro OCD-162 disinfection systems produce and dose
chlorine dioxide for the disinfection of drinking water, process
water, cooling water and wastewater.
Oxiperm Pro consists of a plastic system frame, on which the
internal components are mounted. They are prepared for wall- or
floor-mounting, and covered by a plastic cover.
The chemicals are supplied from two separate chemical
containers which should be isolated from one another with
separate secondary containment. A suction lance is inserted in
each container and is permanently connected to the
corresponding precursor dosing pump. The suction lance cables
send low-level and empty signals to the controller.
The Oxiperm Pro OCD-162 is connected to two water lines:
• The potable water line for supplying dilution water and flushing
water.
• The main water line to be disinfected, into which the final
chlorine dioxide solution is dosed.
Oxiperm Pro OCD-162 without cover and peripheral devices
Fig. 1
8