Make Fax Settings; Register User Telephone Number And Unit Name; Information About The Keys - Canon imageRunner C1028i Guía De Inicio

2 Set Up the Machine

Make Fax Settings

This section describes how to make the fax settings.
If you are using the imageRUNNER C1028i without the optional Super G3 FAX Board, skip the procedure described in this section.
Go to "Set up Network Connection, " on p. 18.
Register User Telephone Number and Unit Name
This section describes the procedure for registering the user telephone number and unit name. Refer to the
"Information About the Keys" below.
Information About the Keys
Use the keys shown below to enter information in the machine.
You can enter the following characters in each input mode:
10
Press - (numeric keys) to enter numbers.
●
Press the Left/Right Any key to select the
●
alternative key at the bottom of the display.
Press [ ▼ ] [ ▲ ] [ ◀ ] [ ▶ ] to move the cursor
●
position.
Use (Scroll Wheel) to move the cursor
●
position.
Press [OK] to set the entry or to proceed to the
●
next screen.
Press [Back] to return to the previous screen.
●