Precautions for use
DON'TS
Do not attempt to disassemble the camera or other units. In order to prevent electric
shock, do not remove screws or covers. There are no user-serviceable parts inside.
Do not abuse the camera. Avoid striking, shaking, etc. The camera contains sensitive
components which could be damaged by improper handling or storage.
Do not let the lens remain uncapped when the camera is not use. If the lens is not
installed, do not leave the lens mount hole uncovered.
Do not touch the surface of the lens or prism.
Do not use strong of abrasive detergents when cleaning the camera body.
Do not aim the camera toward the sun, no matter whether it is turned on or not.
Do not expose the camera to rain or moisture, and do not try to operate the equipment
in wet conditions. Do not operate the camera if it becomes wet.
Do not operate the camera outdoors during a lightning storm.
Do not use the camera in an extreme environment where high temperatures or high
humidity exist.
Do not leave the camera turned on when not in use. Do not unnecessarily turn the
camera power on and off repeatedly.
Do not block the ventilation slots.
Do not cover the port otherwise block ventilation during operation. Internal heat buildup
can cause a fire.
Do not use the camera outdoors.
The camera is designed to be used indoors.
Do not install or use the camera in the following locations.
– Locations such as swimming pools where chemicals are used
– Locations such as a kitchen where the high levels of steam and oily vapors are
present
– Locations where radioactive rays, X-rays or strong radio waves or magnetic fields are
generated
- 7 (E) -