The Service Setting Menu; Lens Control - Sony VPL-X2000U Manual De Instalación

The SERVICE MODE Menus

The SERVICE SETTING Menu

The SERVICE SETTING menu is for the settings to
be adjusted before operation.
S SERVICE SETTING

LENS CONTROL:

DIRECT POWER ON:
ON DELAY:
RS-232C/422A:
PJ COM:
Operation
1. Select an item
Use the V or v key to select the item, then press the b
or the ENTER key.
2. Change the setting
Press the V or v key to change the setting.
3. Restore the original screen
Press the B or the ENTER key.
The original screen is restored.
LENS CONTROL
When set to OFF, the SHIFT, FOCUS and ZOOM
keys on the Remote Commander and the control panel
do not function. To activate the keys, set to ON.
S SERVICE SETTING
LENS CONTROL:
DIRECT POWER ON:
ON DELAY:
RS-232C/422A:
PJ COM:
DIRECT POWER ON
Set to ON when you want to turn on the projector by
simply plugging in the AC power cord.
S SERVICE SETTING
LENS CONTROL:
DIRECT POWER ON:
ON DELAY:
RS-232C/422A:
PJ COM:
60
(GB)
INPUT-A
O N
O F F
O F F
3 8 . 4 K
3 8 . 4 K
INPUT-A
O N
O F F
O F F
3 8 . 4 K
3 8 . 4 K
INPUT-A
O N
O F F
O N
3 8 . 4 K
3 8 . 4 K
ON DELAY
When connecting multiple projectors, set to ON to turn
on the projectors sequentially one by one. The delay
time depends on the device index number on each
projector.
S SERVICE SETTING
LENS CONTROL:
DIRECT POWER ON:
ON DELAY:
RS-232C/422A:
PJ COM:
RS-232C/422A
Sets the data transmission rate of the RS-232C/422A
connector.
S SERVICE SETTING
LENS CONTROL:
DIRECT POWER ON:
ON DELAY:
RS-232C/422A:
PJ COM:
Note
Set the same data transmission rate for all the
projectors and computers.
PJ COM
Sets the data transmission rate of the PJ COM
connector.
S SERVICE SETTING
LENS CONTROL:
DIRECT POWER ON:
ON DELAY:
RS-232C/422A:
PJ COM:
Note
Set the data transmission rate of all equipment
connected via the PJ COM connector to the same rate.
INPUT-A
O N
O F F
O F F O N
O N 3 8 . 4 K
3 8 . 4 K
INPUT-A
O N
O F F
O F F
3 8 . 4 K
1 9 . 2 K
3 8 . 4 K
9 6 0 0
INPUT-A
O N
O F F
O F F
3 8 . 4 K
3 8 . 4 K 3 8 . 4 K
1 9 . 2 K
9 6 0 0