Sony VPL-X2000U Manual De Instalación página 62

The SERVICE MODE Menus
Restoring the USER MODE
Normally, once you turn off the power using the
STANDBY key on the Remote Commander after
making adjustments, the USER MODE is
automatically restored when you turn on the power
again.
To restore the USER MODE before turning off the
power, follow the steps below.
1
Press the keys on the control panel in the following
order:
ENTER key, ENTER key, V key, v key, ENTER
key
The following screen appears.
Do you wish to return
to the USER MODE?
YES:
NO:
2
Press the V key.
The projector goes back into the USER MODE.
You cannot display the SERVICE MODE menus.
62
(GB)