Sony VPL-X2000U Manual De Instalación página 43

When using the switcher
When connecting two PC-3000 switchers, up to 15
inputs can be selected as the input from the switchers.
Install the IFB-12A interface board in the first switcher
(on which you set the SW NO switch to 1) and set the
IN/OUT switch on the board to IN.
SIC-10 connecting cable
(5BNC ˜ 5BNC)
(not supplied)
IFB-12A
IN/OUT switch: OUT
IFB-12A
IN/OUT switch: IN
to OUTPUT
PC-3000 switcher
SW NO switch: 2
• Be sure to set the switcher number.
• Be sure to turn off the power of the projector when
Rear
INPUT C INPUT B INPUT A VIDEO
+
–
AUDIO OUT
REMOTE CONTROL S TRIG DEVICE INDEX
0
RCC-5G/10G/30G
connecting cable
(not supplied)
INPUT C INPUT B
INPUT A VIDEO
+
–
AUDIO OUT
REMOTE CONTROL S TRIG DEVICE INDEX
0
PC-3000 switcher
to OUTPUT
SW NO switch: 1
OUT PUT
SW NO
RS-232C
RS-422A
Notes
setting up the device index number and connecting
cables.
Device index number: 02
AC power cord (supplied)
to AC IN
Device index number: 01
AC power cord (supplied)
to AC IN
to PJ COM OUT
OUT PUT
RS-232C/422A
SW NO
RS-232C
REMOTE
RS-422A RS-485 IN
RS-485 OUT
to IFB-12A to PJ COM IN
installed in
SW NO.
the switcher
2 3 4
1 5
8 6
7
RS-232C/422A
REMOTE
RS-485 IN
RS-485 OUT
to PJ COM OUT
to a wall outlet
Attach the
supplied
terminator.
Signal flow
:
to a wall outlet
SW NO.
2 3 4
1 5
8 6
7
Computer
Attach the
terminator
(supplied with
the PC-3000).
Computer
43
(GB)