EdilKamin NILO Instalación Uso Y Mantenimiento página 48

REMOTE CONTROL cod. 633310
: ignition / shutdown button (press for approximately 1 second) this button can also be pressed to
exit the programming menu
+
:
button to increase the power/operating temperature (when inside a menu, it increases the displayed
variable)
-
:
button to decrease the power/operating temperature (when inside a menu, it decreases the displayed
variable)
A :
button to switch to the "EASY TIMER " program
M :
button to toggle from automatic to manual mode and vice versa
DESCRIPTION OF DISPLAY SYMBOLS OF THE REMOTE CONTROL
Indicates data transmission between the remote
control and the control board.
low batteries; replace them and put them in their
appropriate containers.
blocked keypad; avoid turning on the remote control
for no reason (press "A" and "M" simultaneously for
a few seconds to block/unblock the keypad)
Indicates that ignition / shutdown is being via
the "EASY TIMER" program
Indicates that a setting has been transmitted for
the stove to ignite
INSTRUCTIONS FOR USE
fan speed indicator
pellet/water thermo stove remote control
setting indicator
pellet/water stove remote control setting indicator
automatic function
(the temperature value appears on the display)
manual adjustment function
(the operating power value appears on the display)
Indicates the room temperature detected by the
remote control (it indicates the values of the set
parameters during its technical set-up).
48