Hints On Disposal - Klarstein 10033689 Manual De Instrucciones

EN
46
Problem
Beer flows out too slowly
CO leaks quickly when
2
inserting new cartridge.

HINTS ON DISPOSAL

According to the European waste regulation 2012/19/EU this
symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it should
be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of
this product, please contact your local council or your household
waste disposal service.
Possible Cause
1. Inside CO pressure
2
isn't high enough.
2. The connection tube
or the pouring tube has a
leakage.
1. CO pressure regulator
2
is not in "-" position.
2. Connector seal broken.
3. Piercing pin broken.
Suggested Solution
1. Adjust the pressure
knob to release much CO
2
pressure or replace a new
one.
2. Check whether the tube
has a leakage or not, if so
replace the tube.
1. Make sure CO
2
pressure regulator is in "-"
position.
2. Replace connector seal
(see page 43).
3. Replace piercing pin
(see page 43).