Resetting the filter
display
i
If the filter display is not reset,
the next required filter change
cannot be signalled by the
display.
After each filter change:
q
Simultaneously hold down the
SUPER and ICE buttons for
3 seconds.
Deactivating the filter
display
i
The appliance might be used
without a "UltraClarity" water
filter. If you choose this option
replace the water filter by a
water filter substitute cartridge.
In this case the filter display
might be deactivated to prevent
filter change messages.
To purchase a water filter
substitute cartridge contact
your local dealer or call
1-800-578-6890.
d
WARNING
To avoid serious illness or death,
do not deactivate the filter display
while using an "UltraClarity" water
filter.
To deactivate the filter display:
q
Simultaneously hold down the
SETUP and ICE buttons for
3 seconds.
i
Re activate the filter display by
pressing the SUPER and ICE
d
buttons for 3 seconds
simultaneously.
3 sec.
21