Water Connection; Before Installation; Connecting The Water Hose To The Refrigerator; Connecting The Water Line To The Water - Fulgor Milano F6FBM36S1 Instrucciones Para El Uso

Installation

3.7 Water connection

First you must connect the water hose to the
refrigerator.

3.7.1 Before Installation

Make sure that you have everything necessary
to ensure proper installation before proceeding,
including:
Internal water filter for use inside the fridge.
3.8 Connecting the water
hose to the refrigerator
1. Slip the union (B) onto the water hose (A).
2. Push the water hose downwards firmly to slip it
onto the water inlet valve (C).
3. Tighten the union (C) by hand to secure it onto
the water inlet valve.
C
Normally, you are not required to tighten
the union with a tool. However, you can use
a spanner or pliers to tighten the union if
there is a leakage.
3.9 Connecting the water line
to the water supply
Connect the water line to a water supply valve. If a
valve is not present or you are not sure, consult a
qualified plumber.

3.10 Water filter

To fit the water filter, follow the instructions below
referring to the figures supplied:
12 /33 EN
Refrigerator / User Manual