Troubleshooting - Fulgor Milano F6FBM36S1 Instrucciones Para El Uso

Ocultar thumbs Ver también para F6FBM36S1:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7

Troubleshooting

Please review this list before calling the service. It will save your time and money. This list includes
frequent complaints that are not arising from defective workmanship or material usage.
The refrigerator does not operate.
The plug is not inserted into the socket correctly. >>> Insert the plug into the socket securely.
The fuse of the socket which your refrigerator is connected to or the main fuse have blown out. >>> Check the
fuse.
Condensation on the side wall of the refrigerator compartment.
Ambient is very cold. >>> Do not install the refrigerator in places where the temperature falls below 10 °C add
0°F .
Door has been opened frequently. >>> Do not open and close the door of refrigerator frequently.
Ambient is very humid. >>> Do not install your refrigerator into highly humid places.
Food containing liquid is stored in open containers. >>> Store food with liquid content in closed containers.
Door of the refrigerator is left ajar. >>> Do not leave the doors of your refrigerator open for a long time.
Thermostat is set to a very cold level. >>> Set the thermostat to a suitable level.
Compressor is not running
Protective thermic of the compressor will blow out during sudden power failures or plug-out plug-ins as the
refrigerant pressure in the cooling system of the refrigerator has not been balanced yet. The refrigerator will
start running approximately after 6 minutes. Please call the Authorized Service Agent if the refrigerator does not
start at the end of this period.
The refrigerator is in defrost cycle. >>> This is normal for a full-automatically defrosting refrigerator. Defrosting
cycle occurs periodically.
The refrigerator is not plugged into the socket. >>> Make sure that the plug is fit into the socket.
Temperature settings are not made correctly. >>> Select the suitable temperature value.
There is a power outage. >>> Refrigerator returns to normal operation when the power restores.
The operation noise increases when the refrigerator is running.
The operating performance of the refrigerator may change due to the changes in the ambient temperature. It is
normal and not a fault.
The refrigerator is running frequently or for a long time.
New product may be wider than the previous one. Larger refrigerators operate for a longer period of time.
The room temperature may be high. >>> It is normal that the product operates for longer periods in hot
ambient.
The refrigerator might be plugged in recently or might be loaded with food. >>> When the refrigerator is
plugged in or loaded with food recently, it will take longer for it to attain the set temperature. This is normal.
Large amounts of hot food might be put in the refrigerator recently. >>> Do not put hot food into the
refrigerator.
Doors might be opened frequently or left ajar for a long time. >>> The warm air that has entered into the
refrigerator causes the refrigerator to run for longer periods. Do not open the doors frequently.
Freezer or refrigerator compartment door might be left ajar. >>> Check if the doors are closed completely.
The refrigerator is adjusted to a very low temperature. >>> Adjust the refrigerator temperature to a warmer
degree and wait until the temperature is achieved.
Door seal of the refrigerator or freezer may be soiled, worn out, broken or not properly seated. >>> Clean or
replace the seal. Damaged/broken seal causes the refrigerator to run for a longer period of time in order to
maintain the current temperature.
Freezer temperature is very low while the refrigerator temperature is sufficient.
The freezer temperature is adjusted to a very low value. >>> Adjust the freezer temperature to a warmer
degree and check.
Refrigerator temperature is very low while the freezer temperature is sufficient.
31 / 33 EN
Refrigerator / User Manual

Publicidad

Tabla de contenido
loading

Tabla de contenido