Grundfos Intertek MAGNA1 Installation And Operating Instructions página 14

5.2.2 Models 40-XX, 50-XX, 65-XX, 80-XX, 100-XX
Step Action
Remove the front
cover from the
control box.
1 Note: Do not
remove the
screws from the
cover.
Locate the power
supply plug and
2 conduit adapter in
the box supplied
with the pump.
Connect the
3 conduit adapter to
the control box.
Pull the power
supply cable
4
through the
conduit adapter.
Strip the cable
5 conductors as
illustrated.
14
Illustration
Step Action
Connect the cable
conductors to the
power supply
6 plug.
L - L or L1
Ground - Ground
N - N or L2
Insert the power
supply plug into
7 the male plug in
the pump control
box.
Tighten the
conduit adapter.
8
Refit the front
cover.
Illustration