P10 Radio-Controlled Perimeter Sensor - Gardesa Biptronic Manual De Instrucciones

P10 RADIO-CONTROLLED
Passive infrared barrier sensor for doors and windows, 2m working
range, for installation with BIPTRONIC armoured doors. Suitable
for wall and corner mounting.
The recognition code (transmission code) is programmed with
10 dipswitches.
A led mounted below the lens indicates the sensor is working.
TECHNICAL DATA:
- Power supply: 1 lithium
battery 3.6V 3,3 Ah size A
- Lifetime: 3 years with 50
activations a day
- Coverage: >3 m2 with 90°
angle of view and 2 m depth
range
- Transmitter operating
frequency: 433 MHz
- Transmitter range: 10 ÷ 15 m in residential installations
- Operating temperature: - 0 to +50 °C
WORKING
The P10 passive infrared barrier sensor
detects persons (or thermally similar bodies)
violating the protected perimeter through
windows or doors.
In case of a signifi cant detection, the sensor
broadcasts a coded alarm request signal,
confi rmed by two fl ashes of the led G.
After broadcasting the alarm request signal, the sensor deactivates
for one minute (PAUSE) before returning to normal operation.
The led G is usually switched off during the PAUSE.
If the sensor detects a signifi cant motion during the minute-long
pause, it resets the pause timer to the beginning of the minute.
When battery power is low (but still with a reasonable margin before
exhaustion and therefore sensor deactivation) the led G fl ashes
continuously every two seconds to indicate low charge and notify
the user that the battery needs replacement.
MTPBB06-25 - Rev. 00
PERIMETER SENSOR
GB
53