Maintenance - Gardesa Biptronic Manual De Instrucciones

BIPTRONIC system components must have fully charged batteries
to operate correctly over time, and the electronic keys must be kept
in a safe and secure place.
C10 ELECTRONIC KEY
REPLACING THE BATTERY
We recommend replacing the battery when the key is in the low
charge condition, as indicated by the door lock during operation.
1 - Remove the battery holder from the key by pressing in the side
grips.
2 - Replace the battery and fi t the new one in the holder, taking
care to respect the indicated polarities.
3 - Fit the holder back into the battery housing door.
IN THE EVENT OF KEY - PERSONAL CARD LOSS
In case of key or personal card loss, replace all the keys purchasing
a new set of keys and new system codes from a GARDESA
authorised retailer.
IN THE EVENT OF KEY MALFUNCTION
In case of key breakage, request a substitute key from your
GARDESA authorised retailer. You must supply a functioning key
(for copying) and the relative personal code card..
MTPBB06-25 - Rev. 00

MAINTENANCE

GB
57