<STAND TYPE>
FRONT HANDLE PIPE
CONTROL PANEL
(See page 13)
<WHEEL TYPE>
CONTROL PANEL
(See page 13)
NOTE:
The generator may become unstable
if all four wheels are not firmly on the
ground.
Confirm that all four wheels are
firmly on the ground before
operation.
3. COMPONENT IDENTIFICATION
FRONT COVER
GROUND TERMINAL
Raise the stopper lever and slide the
stopper in the direction of the arrow
so that it enters the hole in the wheel
and then lower the stopper lever.
Confirm that the wheel is locked.
STARTER GRIP
STOPPER
11