Manual starting
CAUTION:
When starting the generator after adding fuel for the first time, after long-
term storage, or after running out of fuel, turn the fuel valve lever to the
ON position, then wait for 10 to 20 seconds before starting the engine.
Before starting the engine disconnect any load from the AC receptacle.
1. Turn the fuel valve lever to the ON position.
ON
ON
FUEL VALVE LEVER
2. Pull the choke knob out to the CLOSED position.
NOTE:
Do not use the choke when the engine is warm or the air temperature is high.
CLOSED
CHOKE KNOB
23