Promax AE-966 Manual De Instrucciones página 267

3.- Press F3 (Detection).
4.- Select the signal detection type from F1 ~
F5 and press it. See below for description of
each type.
4.- Press F6 (Return) para volver al menú
anterior.
Parameter
Normal
Sample
Peak +
(positive peak)
AVG (average)
Qpeak
(quasi-peak)
Page 76
The default mode. When the signal level is
constantly increasing or decreasing detects the
positive peaks.
switches between positive peak and negative
peaks. Useful for picking up burst phenomenon
while avoiding too much noise.
Detects signals randomly. Useful when detecting
noise-like signals,
phenomenon.
Detects positive peak signals. Useful for
detecting sinusoid signal, but tend to pick up more
noise than other modes.
Available when the optional EMI filter is installed.
Detects the average power level of the samples,
using low pass filter. Useful for reducing the noise
level. For EMI filter details.
Available when the optional EMI filter is installed.
Detects the quasi-peak power level of the
samples. Useful for viewing in zero span without
missing signal variations. For EMI filter details.
USER'S MANUAL AE-966 / 967
Detection..
Normal
Sample
Peak+
AVG
QPeak
Return
Otherwise, detecting
but tend to miss
F 3
F 1
F 2
F 3
F 4
F 5
F 6
mode
burst
04/2016