Verathon GlideScope Go Manual De Funcionamiento Y Mantenimiento página 19

PROCEDURE 6. PERFORM A FUNCTIONAL CHECK
Before you use the device for the first time, ensure the system is working properly.
1. Fully charge the monitor battery.
2. Attach the video laryngoscope to the monitor, according to the prior procedure.
Press the Power button. The monitor turns on.
3.
4. Look at the screen, and verify that video is being received from the laryngoscope.
Note: The edges of the blade or Stat may be captured in the camera view. This
image acts as a frame of reference during the intubation process and ensures that
the orientation of the image is correct in the monitor.
13
0900‑4788 REV‑10