Audio Signal Tones - Motorola MTH800 Guia Basica Del Usuario

Audio Signal Tones

= High Tone;
Description
Idle
• Back to Home display
• Back to rotary volume
use when rotary scroll
timer expires
• Back to coverage
• Back to full service
Clear-to-send.
• Bad key press
• Good key press
• MTH800 self-test fails at
power up
• From out-of-service to
in-service
In Call
Call clear warning
Call waiting tone while
Phone or Private Call are
pending
Data Connected or
Data Disconnected.
Talk Permit sounds upon
pressing the PTT.
Talk Permit without
gateway sounds upon
pressing PTT. The tone
indicates the gateway is
no longer available.
= Low Tone;
Type Repeated
Once
Once
Once
Once
Once
Every 6 seconds,
until a call is
terminated.
Once
Once (Normal Tone)
Once (Short Tone)
Twice
Once
7