Cleaning Your Appliance - Moulinex soup & co Manual De Instrucciones

BLENDER MODE (without cooking)
0
Plug in the appliance; the LCD screen
displays "00.00".
max
ice
1- Select a speed by turning the selector to the
0
right. The blending starts and the time is
displayed on the screen. In blender mode, you
max ice
can select up to 5 different blending speeds.
Pulse speed is on the left of position 0.
2- Turn the speed selector to position 0 to stop
the appliance.
3- Press the trigger (d2) and lift the blender
bowl (D).

CLEANING YOUR APPLIANCE

• Do not immerse the appliance in water. Do not put the
motor unit (A) under running water.
• Fill the bowl with 1 litre of water with 2 or 3 drops of
washing-up liquid.
P3 - Auto clean
• Once the programme is complete, unplug the appliance.
• Press the trigger (d2) and lift the blender bowl (D).
• Place the bowl on a flat surface.
• Unlock the lid by rotating it through a quarter turn in the
clockwise direction. Remove the lid carefully.
• When the parts have cooled down, unclip the gasket
retainer from the lid using the grip areas.
• Finish cleaning the bowl with a sponge.
• Rinse the inside of the bowl and the lid under running
water.
Temperature (Max)
100 °C
If you want to programme an operating time with
automatic switch-off:
1- Adjust the operating time using the
+ (increase) and – (decrease) keys.
2- Select a speed by turning the selector. The
countdown is displayed on the screen.
0
3- The motor stops automatically when the
max ice
countdown is over.
Crushed ice key: the "Ice" key is used to
0
make crushed ice. You can stop the
appliance whenever you want by pressing
max ice
the "OFF" key. You can crush up to 6 to 8 ice
cubes maximum.
• Use the automatic programme P3 (Auto clean) to
pre-wash the bowl.
Adjustable time
1 min (adjustable
from 30 s to 5 min)
• Handle the blades (d3) of the blender bowl carefully
when you clean them and when you empty the bowl;
they are very sharp.
• To clean the motor unit (A), use a moist cloth. Dry it
carefully.
• For easy cleaning, be sure to wash the removable parts
in warm soapy water immediately after use (lid, gasket
retainer, gasket, measuring cap).
13
Blending
Max speed