Select A Stitch - Singer SUPERA Manual De Instrucciones

1. Needle position — if the default needle position is
adjusted (or if straight stitch is selected), the active one is
shown here
2. Recommended presser foot — indicates what presser
foot is recommended to use for the selected stitch to obtain
the best stitch result
3. Active stitch menu — what stitch menu is active
4. Stitch number — the currently selected stitch with
number and graphic
5. Needle stop position — indicates if needle "UP" or
"DOWN" is active
6. Auto-Stop is activated
7. Mirror image — if activated, the stitch image will also be
mirrored
8. Elongation — the number indicate how much the stitch is
elongated (x1 is default setting)
9. Buttonhole lever indicator— indicate that a buttonhole is
selected
10. Bobbin winding indicator — indicates that the bobbin
winding motor is activated
11. Stitch length — the current length for the selected stitch
12. Stitch width — the current width for the selected stitch
(when straight stitch is selected, no width is shown, instead
the needle position icon is shown)

Select a Stitch

Your machine has four stitch menus. Menu 1 includes the most
frequently used utility stitches, and are printed on the machine
next to the stitch selection buttons, Menu 2 has both utility and
decorative stitches. Menu 3–4 are a Font menus. Here, you
will find two sets of font styles, letters and numbers you can
use to create sequences.
When you turn on your machine, stitch menu 1 is activated
and straight stitch (stitch no. 1) is selected (A).
Press "Stitch Menu" (B) to toggle between the stitch menus.
The currently selected menu is shown on the display (A).
The stitches on Menu 1 have a direct selection. Once Menu 1
is selected, just press the button next to the stitch to select it
(C).
The stitches on Menus 2–4 are pictured on the Stitch
Reference Charts that can be pulled out at the bottom of the
machine. The Stitch Menu number is listed within a folder
above the stitches (D). The Stitch Number is printed above the
picture of respective stitch (E).
By pressing the digits in quick succession you will be able to
select a stitch from 10 and up from the selected stitch menu (F).
If the stitch number does not exist in the selected menu you
will hear a beep and the latest selection will remain.
To select another stitch in the same menu just press the number
of the stitch.
To select a stitch in another menu you will first need to change
stitch menu and then select the stitch.
5
3 4
2
1
12
A
B
C
D
E
F
+ +
=
6 7 8
9
10
11
Operating Your Machine – 21
English