Parts Included - Airwell MFH Manual Del Usuario

ACCESSORIES AND INSTALLATION OF HEAT EMISSION DUCT
• Length range of heat emission duct should
be 50~150 cm. It is recommended to use
it with shortest length.
• When installed, the emission duct should
be as flat as possible. Do not extend the
pipe or connect it with other exhaust pipe,
which would cause abnormal operation.
Correct installation is as shown in figure
(When installing it on a wall, height of wall
should be about 40 -130cm from floor).
If duct is to be bent, please install it by considering following the dimensions.
55cm
7 ACCESSORIES AND INSTALLATION EMISSION DUCT
ACCESSORIES AND INSTALLATION OF HEAT EMISSION DUCT
55cm

PARTS INCLUDED

Front plastic pipe end Rear plastic pipe end
Window Emission Adapter
Wrong installation is shown in the following
figure (If the pipe is bent too much, it could
easily cause a malfunction.)
Flexible Emission Duct
ACCESSORIES AND INSTALLATION OF HEAT EMISSION DUCT 8