Using The Adjustment Feet; Using The Lens Shift - Sim2 Multimedia Mico 50 Manual De Uso E Instalación

Using the Adjustment Feet

•
The height of the projector can be adjusted using the
adjustment feet when the surface the projector is
placed on is uneven or when the screen is slanted.
•
The projection of the image can be made higher by
adjusting the projector when it is in a location lower
than the screen.
•
If the screen is at an angle, the adjustment
used to adjust the angle of the image.
•
When the height of the projector is
note
adjusted, the image may become
distorted (keystoned), depending on
the relative positions of the projector
and the screen. See page 24 for
details on keystone correction.
•
When lowering the projector, be
info
careful not to get your finger caught
in the area between the adjustment
foot and the projector.

Using the lens shift

The height and width of the projected image can be
adjusted to be within the shift range of the lens by
motorized control at the lens shift on main menu.
•
In Setup menu, select Lens Shift
note
Function.
•
When moving the lens, if the projected
image remains still, turn the remote
key in reverse direction.
feet can be
12
MiCO 50
Adjustment feet