Projection From Behind The Screen; Projecting A Reversed/Inverted Image - Sim2 Multimedia Mico 50 Manual De Uso E Instalación

Projection from behind the screen

Projecting a Reversed/inverted image

Place a translucent screen between the projector and the audience.
n
Reverse the image by setting "Floor Rear" for "Orientation" in the
n
"Image" menu.
Projection using a mirror
Place a mirror (normal flat type) in front of the lens.
n
Reverse the image by setting "Floor Rear" for "Orientation" in the
n
"Image" menu, when the mirror is placed on the side where the
audience is.
•
When using a mirror, be sure to carefully position
info
both the projector and the mirror so that the light
does not shine into the eyes of the audience.
Ceiling-mount setup
It is recommended that you use the optional ceiling-mount bracket
n
for this installation.
Before mounting the projector, contact your nearest Authorized
n
Service Center or Dealer to obtain the recommended ceiling-
mount bracket (sold separately).
Be sure to adjust the position of the projector to match the
n
distance (Z) from the lens center position to the lower edge of the
image, when mounting the projector on the ceiling.
Invert the image by setting "Ceiling" for "Orientation" in the "Image"
n
menu.
When using the default setting.
qOn-screen Display
The image is reversed.
When using the default setting.
qOn-screen Display
The image is reversed.
When using the default setting.
qOn-screen Display
The image is reversed.
16
MiCO 50