Noise Reduction; Picture Setting; Signal Range - Sim2 Multimedia Mico 50 Manual De Uso E Instalación

Cinema Mode
This function allows you to determine the type of incoming video content-
film. Different algorithms are applied for each of the content types.
Reproduces the image of the film
source clearly. Displays the
optimized image of film transformed
Cinema
with 3:2 pull down (NTSC and
Mode
PAL60Hz) or 2:2 pull down (PAL
50Hz and SECAM) enhancement to
progressive mode images.

noise Reduction

This function is only available for SDTV (480i/576i) and EDTV
(480p/576p) signals.
Noise Reduction is useful for clearing up noisy images. Turn it Low,
Medium, or High to keep in mind that reducing noise (which reduces high
frequencies) may also "soften" the image.
Black level
This function is only available for S-Video and Composite. This control
compensates for incoming elevated black levels present in certain video
signals. For some types of video, you may want to override the setting.
Set it to 7.5 IRE if blacks appear elevated (dark gray). If blacks appear
"crushed" (too dark), set it to 0 IRE.

Picture setting

This function stores Brightness, Contrast, Color, Sharpness, Tint, Filter,
Detail Enhancement, Gamma, Primaries, White Point, Overscan, Aspect
Ratio, Noise Reduction, and Black Level settings. Each stored setting is
reassigned to each input.
•
When Recalling saved Contents:
note
When selecting a saved memory number, the contents
of the "Picture" menu change to the adjustment values
of the saved memory number.
•
When Editing saved Contents:
Edit the contents of the "Picture" menu after selecting
the Memory number for which adjustment values are
to be edited.
save Picture settings
Use this option to save changes you made in "Picture setting" to Memory 1,
Memory 2, or Memory 3.

signal Range

Select signal range 16~235 or 0~255. Only HDMI is available.
20
MiCO 50