Basic Shooting Operations - Panasonic AW‑HE50HE Instrucciones De Uso

Basic shooting operations

1
Set the subject brightness to the appropriate
level.
2
Turn on the power of all the units and devices
in the system.
3
Select the unit to be operated.
Even when using only one unit, it must still be selected
from the wireless remote control or controller.
4
Select the shooting mode.
Select one of the four (FullAuto, Manual1, Manual2 and
Manual3) preset shooting modes (scene files), each of
which corresponds to a set of circumstances in which
the subject will be shot.
Select the mode that satisfies the shooting conditions
and suits your preferences.
When continuing to shoot in the same circumstances,
there is no need to select another mode.
5
Start shooting.
(After shooting, turn off the power of all the
units and devices in the system.)
Note
w p If "FullAuto" has been selected as the setting
for Scene on the camera menu, for example, all
the auto settings will be turned on, and manual
operations will no longer be possible for some of
the items.
With the basic operations, it is assumed that the focus, iris
and white balance will be adjusted automatically (as per the
factory settings).
If the settings have already been changed and the original
settings are to be restored, refer to the "What to do when
encountering problems in the basic shooting operations"
(page 12) and "Camera screen" (page 38) in "Setting the
menu items".
5 (E)