Novoferm NovoSpeed Alu S Manual De Instalación página 8

4.3
GB
Attaching the column to the side that is driven
X
• Erect the column of the driven side to match the width of the sealing
profile.
• Remove the screws from the cover and fold open the column.
• Attach the column provisionally to the door frame with two glue clamps.
• Make sure that the height between the bottom of the horizontal sealing
profile and the bottom of the columns (X) is the same in both columns.
The columns are now horizontal at exactly the same height.
• Secure the columns with bolts or by welding to the floor and to the door
frame.
12
4.4
Aluminium pulley
Torque support
Drive
X
•
•
Pre-installation of the top roller
Top roller
Mount block bearings
on to the console
Loosen the screws from the wooden packaging and remove the sides.
Install block bearings, aluminium pulleys, drive and torque support according to
the drawing.
GB
Aluminium pulley
Block bearings
Mount block bearings
on to the console
13