Abicor Binzel 241 Instructivo De Servicio página 22

EN
English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective
owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 CE marking
2 Safety
2.1 Designated use
2.2 Obligations of the operator
2.3 Personal protective equipment
(PPE)
2.4 Warnings
2.5 Product safety
2.6 Emergency information
3 Product description
3.1 Technical data
3.2 Abbreviations
3.3 Nameplate
3.4 Signs and symbols used
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional description
6 Putting into operation
6.1 Equipping and connecting the
cable assembly
6.2 Equipping the torch neck
6.3 Mounting the cable assembly
on the machine side
6.4 Connecting the coolant
6.5 Connecting the control lead
6.6 Setting the shielding gas volume EN-14
6.7 Introducing the wire
EN - 2
EN-3 7
EN-4 7.1
EN-4 8
EN-4
EN-5 9
9.1
EN-5 9.2
EN-6 9.3
EN-6 9.4
EN-8 9.5
EN-8 10
EN-8
EN-9 11
EN-10
EN-10 12
12.1
EN-10 12.2
EN-11 12.3
EN-11
EN-11
EN-11
EN-12
EN-12
EN-12
EN-12
EN-13
EN-14
MIG/MAG ROBO welding torch
Operation
Welding process
Putting out of operation
Maintenance and cleaning EN-16
Maintenance intervals
Liner
PA liner
Cleaning the wire guide
Cleaning the torch neck
Troubleshooting
Disassembly
Disposal
Materials
Consumables
Packaging
EN-14
EN-15
EN-15
EN-17
EN-17
EN-18
EN-19
EN-19
EN-19
EN-21
EN-22
EN-22
EN-22
EN-22