Abicor Binzel 241 Instructivo De Servicio página 27

MIG/MAG ROBO welding torch
• Never expose the electrical device to rain and avoid a moist or wet
environment.
• Protect yourself from electrical accidents by using insulating mats and
wearing dry clothing.
• Never use the electrical device in areas subject to fire or explosion
hazards.
• Arc welding may cause damage to eyes, skin and hearing! When working
with the device, always wear the prescribed protective equipment.
• Any metal vapours, especially lead, cadmium, copper and beryllium are
harmful to health! Ensure sufficient ventilation or extraction. Always ensure
compliance with the legal limit values.
• Rinse work-pieces that have been degreased with chlorinated solvents with
clear water. Otherwise there is a risk of phosgene gas formation. For the
same reason, no degreasing baths containing chlorine must be placed in
the vicinity of the welding area.
• Adhere to the general fire protection regulations and remove flammable
materials from the surroundings of the welding work area, prior to starting
work. Keep appropriate fire extinguishing equipment ready in the
workplace.
2 Safety
EN - 7