Emergency Information; Product Description; Technical Data - Abicor Binzel 241 Instructivo De Servicio

3 Product description

2.6 Emergency information

3 Product description

3.1 Technical data

Ambient temperature
Relative humidity
Tab. 1
Ambient conditions during operation
Storage in a closed environment, ambient temperature
Ambient temperature for shipment
Relative humidity
Tab. 2 Ambient conditions for shipment and storage
Type of voltage
Polarity of the electrodes
Wire types
Type of use
Voltage rating
Protection type of the machine-side connections
Shielding gas (DIN EN ISO 14175)
Tab. 3
General torch data according to EN 60 974-7
EN - 8
In the event of an emergency, immediately disconnect the following supplies:
• Electricity, compressed air
Further measures can be found in the "Power source" operating instructions or
the documents for further peripheral devices.
MIG/MAG ROBO welding torch
-25°C to +55°C
Up to 90% at 20°C
-25°C to +55°C
-25°C to +55°C
Up to 90% at 20°C
DC
Usually positive
Commercially available round wires
Automatic
Peak value of 141 V
IP2X (EN 60 529)
CO and mixed gas M21
2