Signs And Symbols Used; Symbol Description; Scope Of Delivery - Abicor Binzel 241 Instructivo De Servicio

4 Scope of delivery

3.3 Nameplate

3.4 Signs and symbols used

Symbol Description

• Bullet symbol for instructions and lists

Cross reference symbol refers to detailed, supplementary or further information
1 Step(s) described in the text to be carried out in succession
4 Scope of delivery
• Torch
• Cable support on machine side with central connector
Tab. 8 Scope of delivery
• Bracket (for attachment to the robot)
Tab. 9 Options
EN - 10
The MIG/MAG ROBO welding torch system is identified by a sticker on the
machine-side connection housing.
 1 Identification on page EN-3
When making enquiries, please note the following information:
• Sticker data
The following signs and symbols are used in the operating instructions:
The welding torches in this series come as entire units ready for welding, i.e.
with the cable assembly and central connector. Check whether you have
selected the correct equipment parts for initial assembly.
The ROBO cable assembly does not make the ROBO welding torch fully
functional. Additional welding-task-dependent components are also required
for the initial assembly. These include the following:
Order the equipment parts and wear parts separately.
Order data and ID numbers for the equipment parts and wear parts can be
found in the current catalogue. Contact details for advice and orders can be
found online at www.binzel-abicor.com.
MIG/MAG ROBO welding torch
• Cable assembly
• Operating instructions