Overview
Device elements
Figure 1
1 Cover
2 Support for spray lance
(both sides)
3 Fill opening for system care Advance
RM 110/RM 111
4 Steering roller with fixed position brake
5 Mounting location for transport
(both sides)
6 Wheel
7 Water supply set
8 High pressure hose
9 O-ring set (for replacement)
10 Hand spray gun
11 Spray lance
12 High-pressure nozzle (stainless steel)
13 Steam nozzle (brass)
14 Safety latch of the hand spray gun
15 Power supply
16 Connection for water supply with filter
17 High pressure connection
18 Step depression
19 Pouring vent for detergent 2
20 Pouring vent for detergent 1
21 Folding compartment
22 Pouring vent for fuel
23 Handle
24 Operating field
25 Closing flap for storage compartment
26 Storage compartment for accessories
27 Nameplate
28 Cover lock
29 Oil tank
30 Pressure/quantity regulation of the
pump unit
31 Oil drain screw
32 Backflow valve of the detergent infeed
33 Detergent suction hose 1 with filter
34 Detergent suction hose 2 with filter
35 Fuel filter
36 Service switch
37 Water shortage safe guard with sieve
38 Float tank
39 Fine filter (water)
Operating field
Figure 2
A Power switch
B Temperature controller
C Dosage valve for detergent
D Manometer
1 Indicator lamp pump
2 "Ready for use" indicator lamp
3 Fuel indicator lamp
4 Engine indicator lamp
5 Indicator lamp burner failure
6 Indicator lamp service
7 Indicator lamp system care
The operating elements for the cleaning
–
process are yellow.
The controls for the maintenance and
–
service are light gray.
Symbols on the machine
High-pressure jets can be dan-
gerous if improperly used. The
jet may not be directed at per-
sons, animals, live electrical equipment or
at the appliance itself.
Cleaning of: Machines, Vehicles, Struc-
tures, Tools, Facades, Terraces, Garden-
ing tools, etc.
Danger
Risk of injury! Follow the respective safety
regulations when operating at gas stations
or other dangerous areas.
Please do not let mineral oil contaminat-
ed waste water reach soil, water or the
sewage system. Perform engine cleaning
and bottom cleaning therefore only on
specified places with an oil trap.
– 2
EN
Colour coding
Proper use
9