Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
• Guards protecting against touching moving components (such as the coupling)
must not be removed whilst the product is in operation.
• Leakages (e.g. from a shaft seal) of hazardous fluids (e.g. explosive, toxic or hot)
must be led away so that no danger to persons or to the environment arises.
National statutory provisions are to be complied with.
• Danger from electrical current must be eliminated. Local directives or general
directives [e.g. IEC, VDE etc.] and local energy supply companies must be adhered
to.
2.6 Safety instructions for installation and maintenance work
The operator must ensure that all installation and maintenance work is carried out
by authorised and qualified personnel, who are sufficiently informed from their
own detailed study of the operating instructions.
Work to the product/unit must only be carried out when at a standstill. It is
mandatory that the procedure described in the installation and operating
instructions for shutting down the product/unit be complied with. Immediately
on conclusion of the work, all safety and protective devices must be put back in
position and/or recommissioned.
2.7 Unauthorised modification and manufacture of spare parts
Unauthorised modification and manufacture of spare parts will impair the safety
of the product/personnel and will make void the manufacturer's declarations
regarding safety.
Modifications to the product are only permissible after consultation with the
manufacturer. Original spare parts and accessories authorised by the manufacturer
ensure safety. The use of other parts will absolve us of liability for consequential
events.
2.8 Improper use
The operating safety of the supplied product is only guaranteed for conventional
use in accordance with Section 4 of the operating instructions. The limit values
must on no account fall under or exceed those specified in the catalogue/data
sheet.
3 Transport and interim storage
Immediately after receiving the product:
• Check the product for damage in transit
• In the event of damage in transit, take the necessary steps with the forwarding
agent within the respective time limits.
CAUTION! Risk of damage to property!
Incorrect transport and interim storage can cause damage to the product.
• The pump should be protected from moisture, frost and mechanical damage due
to impact during transport and interim storage.
• The device must not be exposed to temperatures outside the range of –10°C to
+50°C.
22
01/2015
Publicidad
Tabla de contenido
