Grill Module - GE JGP18 Guía De Uso, Cuidado E Instalación

The grill consists of two black grill grates and a grill burner. Only install the
grill on the left side of your cooktop.
To Install Grill Module
1. Before installing grill components, be certain
control knobs are in the OFF position.
2. Position the grill burner with mixer tube openings
toward the orifices. Slide the burner towards the
orifices until the igniter is in between front and rear
grill sections. Lower into place until side openings are
resting on the burner support pins.
3. Place the grill grates on the top of the cooktop.
To Remove Grill Module
1. Remove grill components once they are cool. Be
sure control knobs are in the OFF position.
2. Remove grill grates.
3. Remove grill burners.

GRILL MODULE

NOTE: Before using the grill for the first time,
heat the grill burner to remove the protective
shipping coating. Heat the grill on HI for 10
minutes and use the vent system to remove any
additional smoke during cooling.
11