Product Information - Steamfast SF-294 Guia Del Usuario

Product Information

The following features and accessories are included with your 3-in-1 Steam Mop. Carefully
inspect the packing material for all parts listed below. To obtain possible missing parts, refer to
Product Support on Pages 17 & 18 of this manual.
4 | ENGLISH
UNIT FEATURES
& ACCESSORIES
1 Steam Nozzle
2 Water Tank
2 Water Tank Cap
a
2
Water Tank Fill Hole
b
3 Power Indicator Light
4 Steam Control Dial
5 Extension Pole
5 Handle
a
5 Cord Brackets
b
6 Mop Head
7
Microfiber Pads (2)
8 Utility Brushes (3)
9 Jet Nozzle
10 Fabric Nozzle
11 Squeegee
12
Measuring Cup
13 Cleaning Pin
•
The Steam Nozzle (1) emits the flow of hot, penetrating steam. The Mop Head, Jet Nozzle and
Fabric Nozzle all connect to the Steam Nozzle.
•
The Water Tank (2) is the translucent reservoir where water is held before being transferred to
the heat exchange and converted to steam. The Water Tank holds 15 oz. (450 ml.) of water.
•
The Water Tank Cap (2 ) covers the Water Tank Fill Hole, and must be removed in order to fill
A
the Water Tank with water.
•
The Water Tank Fill Hole (2 ) is the opening through which water is poured into the Water Tank.
B
•
The Power Indicator Light (3) illuminates when the Steam Control Dial is set from "OFF" to any
of the steam intensity settings, to indicate that the unit is powered on and heating.
•
The Steam Control Dial (4) is used to set desired steam intensity, as well as turn the unit
on and off.
•
The Extension Pole (5) connects to the main body of the unit, and is designed for convenient
use on floors, windows, and other out-of-reach surfaces.
•
The Handle (5 ) provides a comfortable grip when using the Extension Pole.
A
•
The Cord Brackets (5 ) provide a safe and convenient way to store the power cord when not in use.
B
•
The Mop Head (6) connects to the Steam Nozzle, for steam cleaning a variety of hard floors.
NOTE: It is NOT recommended that this unit be used on unsealed floors. Use care when
steaming floors that may be warped or damaged by heat and moisture, and limit use of
this unit on these types of surfaces.
•
The Microfiber Pads (7) each attach to the pad grips on the bottom of the Mop Head. The
Pads are designed to clean scuffs and stains from hard floors. The Microfiber Pads are reusable
and machine washable. Two Pads are included.
NOTE: Microfiber Pads are not designed to absorb and collect large amounts of dirt.
For best results, it is recommended to vacuum floor before mopping.
•
The 3 Utility Brushes (8) connect to the Jet Nozzle, and are designed for scrubbing tough
stains. There is a soft bristle Brush for scrubbing delicate items (such as children's toys), a
hard nylon Brush for general scrubbing (such as carpet), and a brass-bristled Brush for
scrubbing metal surfaces (such as oven and grill racks).
NOTE: Use careful judgement when deciding what surface to clean with the brass Utility
Brush. Some delicate surfaces, such as stainless steel, may be scratched or damaged
by the brass bristles. If you are unsure whether or not a surface will be damaged, it is
recommended that you test a small inconspicuous spot before proceeding.
•
The Jet Nozzle (9) connects to the Steam Nozzle, and is designed to focus the flow of steam for
concentrated cleaning.
•
The Fabric Nozzle (10) connects to the Steam Nozzle, and is designed to disperse the flow of
steam for steaming fabrics, linens and upholstery. The Fabric Nozzle also serves as an adapter
for connecting the Squeegee.
•
The Squeegee (11) connects to the Fabric Nozzle, and is used for cleaning windows, mirrors,
and other smooth glass surfaces.
•
The Measuring Cup (12) is used to easily fill the Water Tank with water.
•
The Cleaning Pin (13) is used to remove mineral deposits that may form in the opening of the
Steam Nozzle and the attachments.
ENGLISH | 5