Section 8.0 Maintenance; Headpiece Assembly - BETCHER INDUSTRIES WHIZARD Power Knife Manual Del Usuario

Operating
Instructions
SECTION 8.0
This tool is easily disassembled for cleaning without the use of tools. For best
operation, the Power Knife must be kept clean and sharp.
8.1

Headpiece Assembly

The cutting edge of this blade is VERY SHARP! Handle with care!
Note:
Adjusting the Depth Gauge
This operation is to be performed with the POWER OFF.
Bettcher Industries, Inc.
Maintenance
WARNING:
The use of cut-resistant gloves is recommended
when handling the blade.
The Power Knife is adjustable for
depth of cut by moving the depth
gauge up or down. Two types of
depth gauges are available for the
Power Knife. The regular depth
gauge is shown in the top
illustration. When using the
optional blade cover a short-style
gauge must be used. Both types of
gauges are adjusted the same way.
To adjust, loosen the two knobs
and slide depth gauge UP for
thicker cuts, or DOWN for thinner
cuts. For normal cuts, a setting
where the bottom of the depth
gauge is even with the bottom of
the blade is correct.
Re-tighten the knobs. Do not over-
tighten.
Page 8
Whizard® Power Knife Manual
Rev. January 29, 2016