Cleaning The Motor Unit; Cleaning The Power Supply; Daily Cleaning - BETCHER INDUSTRIES WHIZARD Power Knife Manual Del Usuario

Operating
Instructions
9.2

Cleaning the Motor Unit

The motor unit may be cleaned with soap and water. Do not submerge Motor Unit in water.
Damage to the motor will result. Unplug the Motor Unit when cleaning or servicing.
9.3

Cleaning the Power Supply

Risk Of Shock Hazard - Disconnect From Line Voltage Before Servicing.
Risk of shock hazard. Disconnect from line voltage before servicing. The Power Supply
enclosure may be wiped clean, but do not submerge unit in water. Damage to the Power
Supply will result.
9.4

Daily Cleaning

PERFORMANCE OF YOUR BETTCHER EQUIPMENT, USE
Bettcher Industries, Inc.
WARNING:
BETTCHER INDUSTRIES, INC. PROUDLY
MANUFACTURES QUALITY PARTS FOR YOUR
BETTCHER EQUIPMENT. FOR OPTIMUM
ONLY PARTS MANUFACTURED BY
BETTCHER INDUSTRIES, INC.
Page 14
Whizard® Power Knife Manual
For cleaning, the lever may be taken
off by removing the two shoulder
screws. The flat spring may be
removed from its stud. Do not
remove the other screws. The strain
relief may also be unscrewed for
cleaning. When reassembling, the
hole in the flat spring fits on the
molded stud and its other end is
captured by the tab at the end of the
lever.
Rev. January 29, 2016