BETCHER INDUSTRIES WHIZARD Power Knife Manual Del Usuario página 9

Operating
Instructions
SECTION 7.0
Each component assembly will be covered fully in the sections which follow.
The Power Knife incorporates a safety trigger to minimize accidental starting. TO START,
hold the tool in your operating hand. Use your other hand to push the end of the lever
forward, and simultaneously squeeze the lever with your operating hand. TO SHUT OFF,
simply release the lever.
The tool may be used in either hand.
Bettcher Industries, Inc.
Instructions For Operation (continued)
2. The Motor Unit. This
consists of the motor in a
handle-shaped housing, the
drive adapter with a
replaceable finned driver, the
cap/switch assembly with
power cable, and the switch
lever.
3. The Power Supply. The
Power Supply converts
normal grounded AC line
voltage to low-voltage DC
for the motor.
Page 5
Whizard® Power Knife Manual
Rev. January 29, 2016