Powerboost Function; Cook Time - Thermador MASTERPIECE Serie Manual De Instrucciones

Powerboost Function

The Powerboost function can be used to heat large
amounts of water faster than by using heat level
This function allows you to increase the maximum power
level of the element in use.
Limitation on use
This function is available on all elements, provided that
no other element in the same group is operating, (see
picture). If this is not the case, the
flash on the selected element display; then it will
automatically set the power level
Turning on Powerboost
Select an element.
1.
Touch POWER BOOST. The letter
2.
element display. The function has been turned on.
Turning off Powerboost
Touch POWER BOOST.
and the element returns to heat level
function has been deactivated.
Note: In certain circumstances, the Powerboost function
may be deactivated automatically to protect the internal
electronic components of the cooktop.

Cook time

You can use the timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
CAUTION
9
When using the timer, always keep an eye on the
▯
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
This function should not be used for long periods
▯
of time, especially at high heat settings.
Make sure the cooktop is turned off with the main
▯
power switch after each use.
and symbols will
› Š
.
Š
will light up in the
›
will no longer be displayed
›
. The Powerboost
Š
Setting the cook time
Select the desired element and power level.
1.
.
Š
Touch the TIMER key.
2.
heating element display.
Timer display.
Within the next 10 seconds, set the desired time using
3.
the number keys 0 - 9 or
are displayed:
touch key: 30 minutes
@
touch key: 10 minutes
A
The timer begins to count down.
The element must be selected in order to display the
countdown for the particular heating element.
Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear an audible signal. The indicators
and will flash in the element display. Touch TIMER to
0
turn off the indicators.
Change cook time
Select the element. Touch TIMER and set the new timer
value using the number keys 0-9 or
Cancelling cook time
Select the desired element. Touch TIMER and select 0
from the number keys until the timer display is set to
the indicator will go out. The timer is now turned off.
0
Notes
You can set a cook time of up to 99 minutes.
▯
To program a cook time of less than 10 minutes,
▯
always select 0 first before you select the required
value.
After a power outage, the timer function will be
▯
cancelled.
will appear next to the
0
and min will appear in the
‹‹
and . The basic settings
@ A
and .
@ A
‹
.
‹‹
15