Event Logging - MSA ALTAIR Manual De Operación

OPERATION
3.4.

Event logging

The instrument can log up to 25 of the most important events.
These can be called up and displayed with a PC and the optional
MSA FiveStar
this, the instrument must be connected to the PC via an IR interface.
Stored events
 Alarm
Alarm type – Alarm value – Time/Date
 Reset alarm
Alarm type – Alarm value – Time/Date
Calibration

(pass/fail) – Time/Date
 Self-test
(pass/fail) – Time/Date
 Error
Error type ( Troubleshooting in Section 4)
 End of life
Reason (Error messages  Troubleshooting in Section 4) – Alarm duration
(in minutes) – Life (in months) – Time/Date
Connecting instrument to PC
(1) Switch on PC and align instrument to the IR interface of the PC.
(2) Press the [TEST] key on the instrument.
 Instrument data will be displayed ( Section 3.3)
(3) Start the MSA FiveStar
double-clicking "
The date and time display are based on the computer time.
Make sure that the date and time on the computer are correct.
18
® TM
Link software ( Description of FiveStar
®
Link
CONNECT
ALTAIR Operating Manual
TM
software in the PC and start connection by
".
® TM
Link software). For
MSA
GB