On-Screen Indicators - MSA ALTAIR Manual De Operación

DESCRIPTION
The response levels for the individual gases are set at the factory and cannot be
changed during operation. After commissioning the instrument, changes are
possible only with the MSA FiveStar
 Description of software).
After commissioning the instrument, the remaining operation time is displayed in
months.
If the ambient air contains higher gas concentrations, the instrument
ignores the Fresh Air Setup and goes directly to measuring mode after
the self-test.
2.2.

On-screen Indicators

1
Fig. 2 Display
1 Self-test in progress
2 Bump check indicator
3 Alarm duration (hour glass)
4 Ready indicator
5 Alarm indicator
6 Battery warning indicator
7 Remaining operation time unit
8 Numeric indicator
9 Gas concentration units
8
2 3 4
ALTAIR Operating Manual
® TM
Link software (available as option;
5
MSA
6
7
8
9
GB