Cycle Chart; Delay Start - Electrolux EIDW5705PS Guía De Uso Y Cuidado

6
Operating Instructions
Child Lock Controls.
To prevent children from accidently changing the
dishwasher cycle or starting the dishwasher, lock the
dishwasher controls by pressing and releasing the
AIR DRY pad for 3 seconds. An indicator light on the
lock graphic pad will illuminate when the controls are
locked and no new selections can be made until the
lock is released. To unlock the controls, press the
AIR DRY pad until the indicator light goes out.
Air Dry
The unit defaults to heated dry when it is started
with any cycle selected. This drying uses a
combination of the heated dry with rinse aid that
achieves enhanced drying performance. If you
prefer to only have AIR DRY for dishes, you will
select AIR DRY and the unit will not energize the
heating element. This will reduce energy
consumption, but reduce drying performance.

Cycle Chart

Cycle
Heavy Wash
For pots, pans, casseroles
and dinnerware with
dried-on or baked-on soils.
Normal Wash
For regularly soiled dishes
and silverware.
Auto Wash
A fast wash for lightly
soiled dishes and
silverware.
Eco
For lightly soiled china
and crystal.
Quick
For lightly soiled and
pre-rinsed dishes and
silverware.
Rinse Only
For rinsing dishes that
will be washed later.
(* Includes dry time.)
To Select Cycle
Select HEAVY WASH and
desired OPTIONS.
HI-TEMP WASH will
automatically be provided.
Select NORMAL WASH and
desired OPTIONS.
Select AUTO WASH
and desired OPTIONS.
Select ECO and desired
OPTIONS.
Select QUICK and
desired OPTIONS.
Select RINSE ONLY.
DO NOT USE detergent.

Delay Start

The DELAY START option allows you to automatically
delay starting your dishwasher from 1-24 hours.
On models with 1-24 hour delay, press the DELAY
START pad until the desired delay time shows in the
STATUS window. A light will come on indicating the
delay start hours and will remain on until cycle
starts.
To cancel the DELAY START option and begin the
cycle before the delay period is over, press the
START/CANCEL pad.
Smart Soil Sensor
The Smart Soil Sensor checks the soil level on your
dishes in the Heavy Wash, Light Wash, and Normal
Wash cycles. Depending on soil level, the sensor will
determine if additional water fills are needed to
clean the dishes or if water fills can be deleted.
Cycle time and water usage will vary based on the
amount of soil on the dishes. Cycle time will also
vary based on the options selected and the incoming
water temperature.
(Not all cycles available on all models.)
Water
Soil Level
(approx.)
8.0 gal.
Heavy and
6.7 imp. gal.
Medium
30.4 liters
3.5 gal.
Light
2.9 imp. gal.
13.3 liters
gal.
6.9
Heavy
5.8 imp. gal.
liters
26.1
gal.
Medium 3.5
imp. gal.
2.9
13.3 liters
3.5 gal.
Light
2.9 imp. gal.
13.3 liters
gal.
6.9
Heavy
imp. gal.
5.8
liters
26.1
Medium and gal.
3.5
Light imp. gal.
2.9
liters
13.3
gal.
5.8
imp. gal.
4.8
liters
21.8
4.7 gal.
3.9 imp. gal.
17.6 liters
2.4 gal.
2.0 imp. gal.
9.0 liters
Time*
Washes/
(mins)
Rinses
3 washes
135
4 rinses
130
1 wash
2 rinses
3 washes
120
3 rinses
1 wash
135
2 rinses
1 wash
135
2 rinses
120
3 washes
3 rinses
135 1 washes
2 rinses
105 3 washes
2 rinses
2 washes
70
2 rinses
17
2 rinses