Attach The Cuff - Citizen CHUD514 Manual De Instrucciones

3
Date
After month is set, "date" indicator begins
flashing. Press the
Press the button repeatedly to increase the date
value. Press and hold the button to automatically
cycle through date values. Press the " START/
STOP" button to confirm the date setting.
4
Hour
After date is set, "hour" indicator begins flashing.
Press the button to adjust the "hour". Press
the button repeatedly to increase the hour value.
Press and hold the button to automatically cycle
through hour values. Press the "
STOP" button to confirm the hour setting.
5
Minute
After hour is set, "minutes" indicator begins
flashing. Press the
"minutes". Press the button repeatedly to
increase the minutes value. Press and hold the
button to automatically cycle through minutes
values. Press the "
confirm the minutes setting.

9. ATTACH THE CUFF

1
Insert the air hose plug into the main unit.
* Do not bend the air hose during measurement,
which may cause inflation error or harmful injury
due to continuous cuff pressure.
2
Attach the cuff.
Unroll the cuff and put the end of the cuff through
the metal loop so that the side with the hook and
loop fastener is on the outside.
* Be sure that the cuff size is appropriate to your
arm circumference before attaching the cuff.
* Attach the cuff over a bare arm or a thin sleeve.
* If you roll up your sleeve, your upper arm will be
constricted and this affects your result.
* The blood pressure value is likely to differ
between the right arm and left arm. Measure your
blood pressure with the same arm each day.
button to adjust the "date".
START/
button to adjust the
START/STOP" button to
- Eng 8 -
Air hose plug
Air hose socket
Metal loop