EINHELL HR 1700-F Manual De Instrucciones página 11

Limpiador de alta presión
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
Anl. HR 1700 F 12-spr.
Taking in detergent
Foam spray lance
For using various detergents (see the figure below).
Maintenance
Lubrication
The electric pump is equipped with a closed-circuit
lubrication system. Oil grade: 15W40
Inspecting the water intake filter
Check the intake filter periodically in order to prevent
clogging which could jeopardize the pump's
operation (see the figure).
Electric motor
The electric motor is equipped with a motor circuit-
breaker. If the motor overheats, it will be brought to a
standstill by this circuit-breaker. You must then wait 5
-10 minutes before re-starting the machine. Find the
cause of the overheating.
Power cable
The power cable is not to be damaged in any way.
A damaged cable has to be replaced by a qualified
electrician.
08.11.2001 13:24 Uhr
Inlet
Filter
Seite 11
Terminal diagram
Protection class II
Repairs and replacement parts
Please contact our service centre if any faults arise
or should you need any replacement parts.
Disposing of the machine
You must take the following steps when the machine
is not to be used again:
Pull out the power plug and render the machine
inoperable.
Store the machine in a place that is inaccessible
to children.
No parts of the old machine are to be used as
replacement parts for another machine.
Dismantle the machine and dispose of its
individual parts in accordance with your country's
statutory regulations.
GB
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

41.406.30

Tabla de contenido