Tabla de contenido
Publicidad
Assembly Instructions
GB
USA
Instructions for Assembly
■
The equipment must be assembled with due care by two adult per-
sons.
■
Ensure that you have received all the parts required (see check list)
and that they are undamaged. Should you have any cause for com-
plaint, please contact your KETTLER dealer.
■
Before assembling the equipment, study the drawings carefully and
carry out the operations in the order shown by the diagrams. The
correct sequence is given in capital letters.
Please note that there is always a danger of injury when working
■
with tools or doing manual work. Therefore please be careful when
assembling this machine.
■
Ensure that your working area is free of possible sources of danger,
for example don't leave any tools lying around. Always dispose
packaging material in such a way that it may not cause any dan-
ger. There is always a risk of suffocation if children play with plas-
tic bags!
List of spare parts
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the pro-
duct (see spare parts drawing).
Example order: Art. no. 07162-950 / spare-part no. 10100016
/ 2 pieces / S/N......
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words „with
fastening material".
USA
KETTLER LIMITED WARRANTY
THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, MADE BY EITHER THE DISTRIBUTOR OR THE MANUFACTURER ON KETT-
LER PRODUCTS, EXCEPT THE MANUFACTURER'S LIMITED WARRANTY AGAINST DEFECTS IN MATERIAL SET OUT BELOW:
This KETTLER Limited Warranty applies to products sold through the KETTLER Authorized Dealer Network to the original retail purcha-
ser and authenticated by proof of purchase from a retailer located in the United States. Any shipments made under this warranty will
be shipped to the United States only. Any shipment outside of the United States will be at the sole cost of the customer. This KETTLER
Limited Warranty is a manufacturer's warranty and is not changed or modified by additional warranties extended by individual retai-
lers at the point of sale. Manufacturer warrants this product to be free from defects in material at the time of the product's tender of
delivery for a period of 3 years for residential use and 1 year for non-residential use. This Limited Warranty is not transferable and
does not cover normal wear and tear (including, but not limited to, damage and wear to tires, power shocks, drive belts and other
non-durable parts). The liability of the manufacturer under this Limited Warranty shall not include any liability for direct, indirect, or
consequential damages resulting from the defect. This Limited Warranty is void if the product is damaged by accident, unreasonable
use, improper service, failure to follow instructions provided, modification from its original state, or other causes determined not ari-
sing out of defects in material. This warranty gives you specific legal rights. Should this product become defective due to material wit-
hin the warranty period, contact KETTLER Parts & Service Dept. by phone at 866.804.0440, fax at 757.563.9273, or e-mail at
parts@kettlerusa.com.
THIS LIMITED WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IM-
PLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND OF ANY OTHER OBLIGATIONS OR
LIABILITY ON THE PART OF THE MANUFACTURER. KETTLER NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO AS-
SUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH SUCH PRODUCTS.
4
■
The fastening material required for each assembly step is shown in
the diagram inset. Use the fastening material exactly as instructed.
■
Bolt all the parts together loosely at first, and check that they have
been assembled correctly. Tighten the locknuts by hand until resis-
tance is felt, then use spanner to finally tighten nuts completely
against resistance (locking device). Then check that all screw con-
nections have been tightened firmly. Attention: once locknuts have
been unscrewed they no longer function correctly (the locking de-
vice is destroyed), and must be replaced.
■
For technical reasons, we reserve the right to carry out preliminary
assembly work (e.g. addition of tubing plugs).
■
Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary. Goods may only be
returned after prior arrangement and in (internal) packaging, which
is safe for transportation, in the original box if possible. It is impor-
tant to provide a detailed defect description / damage report!
KETTLER GB Ltd.
GB
Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL
+44 1527 591901
www.kettler.co.uk
KETTLER International Inc.
USA
1355 London Bridge Road
Virginia Beach, VA 23453
www.kettlerusa.com
+44 1527 62423
Mail: sales@kettler.co.uk
+1 888 253 8853
+1 888 222 9333
Publicidad
Tabla de contenido
