Descargar Imprimir esta página

Instructions For Assembly; List Of Spare Parts - Kettler SPIN 1 Indoor Instrucciones De Montaje

Publicidad

Assembly Instructions
GB

Instructions for Assembly

The equipment must be assembled with due care by two adult per-
sons.
Ensure that you have received all the parts required (see check list)
and that they are undamaged. Should you have any cause for com-
plaint, please contact your KETTLER dealer.
Before assembling the equipment, study the drawings carefully and
carry out the operations in the order shown by the diagrams. The
correct sequence is given in capital letters.
Please note that there is always a danger of injury when working
with tools or doing manual work. Therefore please be careful when
assembling this machine.
Ensure that your working area is free of possible sources of danger,
for example don't leave any tools lying around. Always dispose
packaging material in such a way that it may not cause any dan-
ger. There is always a risk of suffocation if children play with plas-
tic bags!

List of spare parts

When ordering spare parts, always state the full item number, spare-
partnumber, the quantity required and the S/N of the product (see spa-
re parts drawing).
Example order: item no. 07135-650 / spare-part no. 10100016 / 2
pieces / S/N......
Important: spare part prices do not include fastening material; if fas-
tening material (bolts, nuts, washers etc.) is required, this should be
clearly stated on the order by adding the words „with fastening mate-
rial".
The fastening material required for each assembly step is shown in
the diagram inset. Use the fastening material exactly as instructed.
Bolt all the parts together loosely at first, and check that they have
been assembled correctly. Tighten the locknuts by hand until resis-
tance is felt, then use spanner to finally tighten nuts completely
against resistance (locking device). Then check that all screw con-
nections have been tightened firmly. Attention: once locknuts have
been unscrewed they no longer function correctly (the locking de-
vice is destroyed), and must be replaced.
For technical reasons, we reserve the right to carry out preliminary
assembly work (e.g. addition of tubing plugs).
Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary. Goods may only be
returned after prior arrangement and in (internal) packaging, which
is safe for transportation, in the original box if possible. It is impor-
tant to provide a detailed defect description / damage report!
KETTLER GB Ltd.
GB
Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL
+44 1527 591901
www.kettler.co.uk
KETTLER International Inc.
USA
1355 London Bridge Road
Virginia Beach, VA 23453
www.kettlerusa.com
+44 1527 62423
Mail: sales@kettler.co.uk
+1 888 253 8853
+1 888 222 9333

Publicidad

loading

Este manual también es adecuado para:

Smash 1 outdoo07135-65007175-650