INSTALL FORWARD-FACING USING LAP/SHOULDER BELT
The Lock-Off provides a way to lock the Child Restraint without needing to lock
your vehicle seat belt.
1. Remove Tether from Tether Compartment. Route vehicle lap/shoulder belt
through the red Forward-Facing Belt Path on the side of the Child Restraint.
Lift the padding on the back of the seat and pull the vehicle belt through the
opening on the opposite side of the Child Restraint.
2. Pass the vehicle belt along the back of the Child Restraint as shown.
3. Pull vehicle belt down through the red Forward-Facing Belt Path on the opposite
side of the Child Restraint. Buckle the vehicle belt.
Note: Before tightening the vehicle belt, route the shoulder belt through the
Lock-Off.
47
1
2
3
CLICK!