Pictograms; Transport; Assembling Instructions; Delivery Conditions - Sima COBRA-40 Manual De Instrucciones

2.1 PICTOGRAMS

Pictograms included in the machine entail the following:
READ
INSTRUCTIONS
MANUAL
USE SAFETY GLOVES

3. TRANSPORT

For short distances, the floor saw COBRA 40 can be transported onto its own wheels. Raise the blade fully and
move the saw manually.
When the machine must be lifted, use the hook located on the front part. It will be then easy to fix steel
cables or chains. (See figure 2). Its weight and dimensions make it easy to transport in small vehicles.
WARNING: use highly- resistant cables or chains (bear in mind the weight of the machine and see the metal
label of the machine).
When you put down the machine, do it gently and avoid any strong bumps on the wheels that could damage
other components. Elevate the machine where indicated by the arrow fig. 2.

4. ASSEMBLING INSTRUCTIONS

4.1 DELIVERY CONDITIONS

The different versions of floor saws model COBRA 40/45 are supplied and single-packed into reinforced
cardboard boxes onto a wooden pallet.
With the machine, the operator will find the following components:
Steel chassis of the machine without blade and with the handlebar removed.
x
Handlebar.
x
A plastic bag containing a small lever for the adjusting blade wheel,
x
A 6mm Allen key as well as an envelope with operator manual, the warranty voucher and the engine
x
manual.

4.2 ASSEMBLING THE ELEVATION WHEEL

The height adjusting wheel, V, Fig.3 is mounted in factory without its handle M, Fig.3 for packing reasons
and to avoid possible shocks during transport. To assemble this handle, you need to place it on the wheel, fastening it
with a 6 mm Allen key A, Fig.3. The handle screwed spot is the housing for the Allen key. Fig. 3

4.3 PLACING THE BLADE

A good choice ensures a good performance and a good final result.
USE HELMET AND EYE AND EAR
DEFENDERS
USE SAFETY FOOTWEAR
6
ENGLISH