Ec Declaration Of Conformity; Standards Applied - Sima COBRA-40 Manual De Instrucciones

EC DECLARATION OF CONFORMITY

Polígono Industrial Juncaril, C/ Albuñol, Parcela 250 C.P. 18220 Albolote, Granada (SPAIN)
Company responsible for the manufacturing and commercialisation of the below specified
machine:
DECLARES
That the above mentioned floor saw designed for cutting joints onto asphalt, concrete surfaces
and other road works is in conformity with the provisions of the following EC directives of the
European Parliament:
2006/42/CE; 2000/14/CE; 2002/44/CE; 2002/95/CE; 2002/96/CE

Standards applied:

UNE-EN 292-1; UNE-EN 292-2; UNE-EN 294; UNE-EN 349; UNE-EN 500-1;
UNE-EN 13862:2002+A1=2009
UNE-EN 1050; UNE-EN 953
Responsible for the Technical Files Development
Eugenio Fernández Martín
Technical Manager
SIMA, S.A.
Polígono Industrial Juncaril, C/ Albuñol, Parcela 250 - 18220 Albolote, Granada (SPAIN)
Albolote 01.01.2010
S I M A , S . A .
S I M A , S . A .
FLOOR SAW
3
The undersigned
the General Manager
Javier García Marina
ENGLISH